The maintenance work of different systems of CNC plasma cutting machine must be clear!

The application of CNC plasma cutting machine will help the workpiece to achieve better processing results during operation, and it should be clear in the later use. Each system of the cutting machine must be maintained in time after long-term use, so that it is beneficial In the later use, the maintenance work can achieve better results. Next, I will introduce the maintenance work of the different systems of the plasma cutting machine.

1). Maintenance of the cooling system

The water inside the water cooler needs to be replaced regularly, and the replacement frequency is generally a week. The quality and temperature of the circulating water directly affect the service life of the plasma cutting torch. It is recommended to use purified water or distilled water, and the water temperature should be controlled below 35. If the water is not changed for a long time, it is easy to form scale, so the water should be changed regularly.

2). Maintenance of dust removal system

After the fan is used for a long time, a large amount of dust will accumulate, which will affect the exhaust and deodorization effect, and also produce noise. If the fan suction is insufficient and the smoke is not exhausted smoothly, first turn off the power, remove the air inlet and outlet pipes from the fan, remove the dust inside, then turn the fan upside down, flip the blades inside until it is clean, and then install the fan.

After the CNC plasma cutting machine works for a period of time, due to the working environment, a layer of dust will stick to the surface of the mirror, which reduces the reflectivity of the mirror and the transmittance of the lens, and affects the working power of the laser. At this time, use absorbent cotton to soak in ethanol, and carefully wipe along the center to the edge of the lens. In addition, the use of high-speed punching is minimized, and the use of conventional punching can extend the life of the focusing lens.

3). Transmission system maintenance

CNC plasma cutting machine equipment will produce smoke and dust during long-term cutting. Fine smoke and dust will pass through the dust cover and adhere to the guide frame. Long-term accumulation will increase the wear of the guide frame. The rack rail is a relatively accurate accessory. Dust deposited on the surface of the guide rail and linear axis for a long time has a great impact on the processing accuracy of the equipment, and will form corrosion spots on the surface of the linear axis of the guide rail, thereby shortening the service life of the equipment. Therefore, in order to ensure the normal and stable operation of the equipment and ensure the processing quality of the product, dust removal and cleaning should be carried out regularly.

The above is the detailed introduction of the maintenance work of the different systems of the CNC plasma cutting machine. During maintenance, the operation of each link and each system must be in place to prevent problems that affect later use, and also prevent affecting the overall operation.

This article is from Shandong Buluoer Intelligent Technology Co., Ltd. Please indicate the source for reprinting!

 (www.buluoerlaser.com)


Post time: Nov-21-2020

Send your message to us:

Write your message here and send it to us